KA Thin Section Bearing

 

1. The use of thin-walled bearings with large bores and small cross-sections can replace small-diameter solid shafts with large-diameter hollow shafts. Such as air, water pipe, and electric wire can be provided through the hollow shaft, making the design more concise.

2. Thin-walled bearings can save space, reduce weight, significantly reduce friction, and provide good rotational accuracy. Without affecting the bearing performance and service life, it can reduce the external dimensions of the design and reduce production costs.

3. Thin-walled bearings seven open series, five sealed series.

There are three types of open bearings: radial contact, angular contact, and four-point contact.

Sealed bearings are divided into radial contact and four-point contact.

Bore diameter of 1 inch to 40 inches.

The cross-sectional size range is 0.1875×0.1875 inch to 1.000×1.000 inch.

 

Thin wall ball shaft because of its very thin wall, can carry a weight of reduced, so this is according to the use of the environment to make a good choice.

Thin-walled bearings are simple in structure and easy to use. Mainly used to bear radial load, but when increasing the bearing radial clearance, has a certain angular contact ball bearing performance, and can withstand the diameter, axial combined load. Compared with other types of bearings of the same size, the thin wall bearing friction coefficient is small, and the limit speed is high.

These thin-walled bearings are mainly used in industrial robots, medical equipment, textile machinery, radar, model aircraft, rocking control cars, machine tools, motors, pumps, agricultural machinery, laser printers, measuring instruments, electronic parts, motors, motors, etc.

 

 

 

Total weight less than 45kg, shipping by express door to door. (DHL, TNT, FEDEX, UPS, ARAMEX)

Hot Tags: ka thin section bearing, ka thin section bearing suppliers, KA Thin Section Bearing, JU055CP0 Thin Section Bearing, Thin Section Bearings